Shree Krishna International

Stone pitching are popularly used for river bank protection preventing erosion of bed and bank during passage of flood. Now-a days, stone mattress in wire crated mesh are also being extensively used in place of loose pitching because of several advantages.. Size and weight of stone and thickness of mattress on sloping and launching apron are to be found so that it can resist the erosive forces for stability. Wire crates are machine made with galvanized wire of about 3 to 4mm size with sufficient tensile strength, flexibility and resistance against puncturing.

Additional Information:

• Production Capacity: 2000
• Delivery Time: 7 days

PVC coated fencing provides additional defence against corrosion and also gives an aesthetic look. It can sustain in extreme hot weather (upto 50° C) and is resistant to Ultraviolet (U.V).

Standard colours Green, Black, Blue, Brown, Red, Grey, White, and Yellow.

Additional Information:

• Production Capacity: 3000
• Delivery Time: 10 days

Chain link fencing is a method of fencing used to secure a boundary which has several advantages beyond an opaque wall. Chain link is a galvanized/ PVC coated wire run through a machine to form into a zig zag pattern which allows the next zig zag wire pattern to sew into it and form a couple. Such couples linked to one another are multiplied to form a metal wall like structure which can offer you many advantages by feature. A chain link fence will look like a wire made into a diamond shape linearly. This made chain link to the required height and length as per your requirement is then fastened to firm fencing posts which can hold the chain link in position to form a transparent wall. A chain link fence is mostly preferred as a cost-cutting solution.
chain-link fence (also referred to as wire netting, wire-mesh fence, chain-wire fence, cyclone fence, hurricane fence, or diamond-mesh fence) is a type of woven fence usually made from galvanized or LLDPE-coated steel wire. The wires run vertically and are bent into a zig-zag pattern so that each "zig" hooks with the wire immediately on one side and each "zag" with the wire immediately on the other. This forms the characteristic diamond pattern seen in this type of fence.
The manufacturing of chain-link fencing is called weaving. A metal wire, often galvanized to reduce corrosion, is pulled along a rotating long and flat blade, thus creating a somewhat flattened spiral. The spiral continues to rotate past the blade and winds its way through the previous spiral that is already part of the fence. When the spiral reaches the far end of the fence, the spiral is cut near the blade. Next, the spiral is pressed flat and the entire fence is moved up, ready for the next cycle. The end of every second spiral overlaps the end of every first spiral. The machine clamps both ends and gives them a few twists. This makes the links permanent.
An improved version of the weaving machine winds two wires around the blade at once, thus creating a double helix. One of the spirals is woven through the last spiral that is already part of the fence. This improvement allows the process to advance twice as fast.